MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier
You looking to find the "
MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier" Good news! You can purchase
MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier with secure price and compare to view update price on this product. And deals on this product is available only for limited time.
Price: $159.95
Product Feature
- 4-channel car amplifier
- 50 watts RMS x 4 at 4 ohms (75 watts RMS x 4 at 2 ohms)
- 150 watts RMS x 2 in bridged mode (4-ohm stable in bridged mode)
- Preamp and speaker-level inputs
- 9-7/8"W x 2-5/16"H x 9-1/16"D
Product Description
The X-Power amplifiers use Global Modulation digital technology based on Alpine's PDX architecture, so they share many of the attributes that make the PDX amplifiers so popular. For the first time, the X-Power amplifiers bring these advanced digital technologies to price-friendly levels.
MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier Review
When my 10-Year old Alpine V12s finally threw in the towel recently, I was back in the market for a new amplifier. The V12s could produce a minimum of 618 watts RMS at 12 Volts (according to the original birth sheet). I split this between a component set and one or two 10" sealed subwoofer(s) receiving about 438 watts. This was power with power to spare.
Being older and perhaps wiser, I was hoping to drop the current load on the car and also cut down on the complexity and space use of my current car audio install (which recycled some old components but added a new head unit). After shopping around I decided on seeking a 4-channel Amp which could produce at least 50 watts a channel, or 200 watts bridged. This is because my sealed 10" subwoofer was chosen back in a day when I was after more power. Rated for 300-600 watts RMS, I really needed to make sure I had enough power to drive it, otherwise I would have to go and find a good lower power sub too (the sound quality of the sub is spectacular so this wasn't ideal). More importantly, I didn't want to spend a lot on a more powerful amp, tempting as that can be.
I searched all over the place, and was surprised to find out that this Alpine Class-D is actually a total beast. PASMAG's review was also favorable, and there I learned that the power was somewhat conservatively rated, and in fact, with the car running, it will produce something like 60 watts RMS/Channel and about 214 watts RMS/bridged. It also uses most of Alpine's best Class-D circuitry from its PDX line while settling for a cheaper chassis. But priced well below $200, it seemed like a smart choice. I expected a flat frequency response, good headroom when pushed, and great sound quality.
PROS:
-Once set up, this amp drives my 5 1/4 components with authority. While I do have to crank my deck up higher than before to reach extreme sound levels, my ears wimp out before this amp does (a good thing).
-Sound quality exceeded my expectations, and actually seems better than my old V12s (which were top of the line at the time). What a difference a decade makes. V12s were considered a "cold" sound. This amp is definitely more "neutral." My system sounded great before, now I am pumped to go through my library and rediscover it with this amp. Tight, clear, detailed, and smooth. Being as picky as I am, I find no faults so far in this department.
-Compact Size, runs cool. Should be able to mount about wherever you want. Even under a seat or behind a big glove box.
-Terminals accept 4 gauge wire, amp is fused. End caps help create a cleaner look when you're finished. Also, uses regular screw-type terminals rather than proprietary terminals as seen on some higher end amps. While those are useful for certain applications, I find that screws are still flexible and reliable.
-Useful HP and LP crossovers, little bass boost at a "smart" frequency (about 48-50hz).
-I highly doubt a better mix of Class D efficiency, sound quality, and price is out there at the moment.
CONS:
-The amp did drive my subwoofer well, but I lost the "bump" when listening to rap or electronic. More comment on that below.
-Chassis quality is somewhat questionable. Plastic mounting points could break with over-tightening, end caps are also plastic (with tiny screws). The V12s were metal bricks with gold plated terminals and metal mounting points while this thing feels a little on the "cheap" side. Perhaps the Class-D efficiency doesn't need as much heatsink.
-No Birthsheet? Others reported receiving one so I was a bit put off to think mine was missing, or skipped. I therefore only have a rough idea what the true power levels are of this amp. Didn't come with any extra fuses or screw terminals (in case you stripped or lost one) like the old V12s did - more cost cutting.
-Only 1-year warranty (not a problem however if this product goes another 5-10 years).
As mentioned, the subwoofer was a 10" in a sealed box and required about 300-600 watts RMS according to original specs. Therefore it was a lot to ask of a small 4-channel amp to drive it. While it did sound good, I decided to pick up a JL Audio "microsub" after auditioning several different products at a local audio store. A ported design rated up to 250 watts RMS, the 8" W3 blew me away with its sound quality and ability to "bump" when asked. Ported designs do tend to be louder per-watt, but at a sacrifice of some sound quality. So far, I find that this sub treats jazz, rock, and electronic/sampled type music extremely well. It has a great tone, and very even response - very comparable to my previous sound. Best of all, it seems to work well with a little less power - even in a sedan. It is expensive however. The ported 8" W1 box is about 80% the equal of the W3, but did not seem to provide the same low frequency impact or general texture of the W3. But for the big price difference, I would recommend it to someone that wants real strong bass reproduction without a huge box or amp. But don't think of these subs as miracle workers - if you are an SPL freak or want to watch your windows explode, you'll want to stick with higher power and bigger / more drivers. If you are after some volume and listen to a diverse range of music, you'll love these little guys.
In short, this amp seems like it could easily drive 4 speakers, a 3-way setup which includes front components and a subwoofer, or even 2 subwoofers. Even with my somewhat higher speaker ratings (100 RMS for the front components, now 250 RMS for the 8" subwoofer), I find that there is enough power to drive the entire system to levels that probably damage hearing. Excellent sound quality, great power, and a great price. Thanks Alpine!
Most of the consumer Reviews tell that the "MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier" are high quality item. You can read each testimony from consumers to find out cons and pros from
MRX-F30 - Alpine 4-Channel 600 Watt Max Speaker Amplifier ...